非开普勒轨道下卫星交会变轨决策研究

针对卫星在非开普勒轨道下的运动特征,提出了研究卫星交会变轨决策的方法。首先,在Hill坐标下,采用比例导引方法求解卫星进行变轨机动时所需要的速度增量。然后,再通过Lagrange插值算法解出卫星在任意特征点上变轨机动所需要的速度增量,根据数字仿真得出大量的仿真数据并画出满足变轨决策条件的决策曲面。最后,对决策曲面的涵义做出分析,说明了该方法对于研究非开普勒轨道下卫星变轨决策问题具有一定的意义。     

自然通风和蒸发冷却在新疆建筑应用的数值分析

为了使新疆和田地区夏季在经济性合理前提下使室内通风环境满足人体热舒适要求。利用蒸发冷却技术将室外空气处理后送入室内，通过数值模拟分析得出在夏季室内负荷最大时刻采用机械辅助式自然通风，使得室温能够雏持在26-8℃，风速为0．6m/s，基本满足人体热舒适要求。在室外温度适宜的过渡季节采用Trombe墙和太阳能烟囱复合的自然通风系统，建筑太阳能烟囱的经济高度为10m。     

《机械制造技术》课程特点与现场教学

《机械制造技术》课程具有很强的综合性和实践性、教学难度大的特点。教学中要以理论教学和现场教学相结合的方法，以提高教学效率和质量。同时要正确选择课题、设计合适的教学方法是改革现场教学的主要措施。     

Collision risk-capacity tradeoff analysis of an en-route corridor model

Flow corridors are a new class of trajectory-based airspace which derives from the next generation air transportation system concept of operations. Reducing the airspace complexity and increasing the capacity are the main purposes of the en-route corridor. This paper analyzes the collision risk-capacity tradeoff using a combined discrete–continuous simulation method. A basic two-dimensional en-route flow corridor with performance rules is designed as the operational environment. A second-order system is established by combining the point mass model and the proportional derivative controller together to simulate the self-separation operations of the aircrafts in the corridor and the operation performance parameters from the User Manual for the Base of Aircraft Data are used in this research in order to improve the reliability. Simulation results indicate that the aircrafts can self-separate from each other efficiently by adjusting their velocities,and rationally setting the values of some variables can improve the rate and stability of the corridor with low risks of loss of separation.     

船舶数字化装配工艺设计与仿真技术研究

船舶数字化装配工艺设计与仿真是对船舶设计模式的创新,探索并研究了船舶三维模型数据转换、结构化工艺设计和装配工艺仿真等技术,打通了基于三维模型的船舶设计、仿真、建造等多个环节的集成链路。应用测试表明,船舶数字化装配工艺设计与仿真能够有效提高船舶建造质量和效率。     

Performance of a small and low-cost chamber to simulate lunar surface environment

The performance of a small and low-cost metal chamber built to simulate the pressure and temperature conditions of lunar surface was assessed and the results are presented. This chamber is intended for studying the physical properties of lunar surface and subsurface (using soil simulants) and also to validate the technology readiness of certain newly developed payloads planned for future lunar surface missions (Lander/Rover). It is possible to reach down to ∼10⁻⁷ Pa under specific conditions and maintain the temperature of the sample under investigation to lunar day and night temperatures. The designed system has been subjected to various tests to evaluate its performance and suitability for carrying out experiments in a simulated lunar environment.     

复杂结构的非线性检测

由于非线性系统的复杂性，现有的各种非线性检测方法都有局限性。从频域、幅域和时域三方面综合考察复杂结构的非线性表现，采用六种方法进行非线性检测，给出一个综合描述系统非线性程度的指标－非线性因子。鉴于非线性系统表现出的非线性强弱与系统所受的激励有直接的关系，将非线性因子定义为与激励的幅值特性和频率特性相关的系数指标。对几种典型非线性系统的仿真模型进行了检测，以验证非线性因子的有效性。     

A systematic approach to nonlinear rotorcraft model identification

The development of a powerful parameter estimation routine and its integration into the simulation environment HOST is described. With this tool approaches are being made towards new strategies of mathematical modeling, aimed at providing highly accurate and nevertheless run-time efficient simulation models. The identification routine is capable of optimizing parameterized models in both dynamic time domain simulation and static (e.g. trim state variation) conditions. Examples of both cases are presented to emphasize the improvement in the system response prediction and to demonstrate the abilities of the identification techniques in combination with the nonlinear simulation platform. This article reviews the activities and achievements accomplished by the DLR Institute of Flight Research and the ONERA Systems Control and Flight Dynamics Department during the last few years in the research on rotorcraft flight dynamics modeling and model identification. Future activities that require extensive high fidelity modeling are in the scope of the current and coming modeling activities that include the use of the presented methods and software technologies.     

槽对超声速混压式进气道性能及附面层的影响

为了提高定几何超 声速混压式轴对称进气道的性能，应用在进气道不同位置开槽的方法 ，研究了在各级锥体上、锥体的折角处开槽时锥体上的附面层变化；研究了多工况下开槽对进气道的总压恢复系数、流量系数、冲压比和起动性能产生的影响。结果表明开槽将改变超声速进气道头锥上的波系分布，使槽后附面层厚度增加。折角处开槽槽后附面层厚度比原型进气道增加16.7%，锥体上开槽比原型进气道增加33.3%。开槽使高马赫数下的总压恢复系数有所增加，其增加量随来流马赫数的变化而变化。在马赫数为4.0的设计状态下，折角处开槽可使进气道的总压恢复系数提高1.8%，锥体上开槽可以提高4.3%。之外，锥体折角处开槽对流量系数影响不大，还可以改善进气道的起动性能，降低起动马赫数。